Making Your First Journey; En Es Es - TomTom ONE User Manual

EN

Making your first journey

Planning a route with TomTom ONE is very
simple. To plan your first route, follow the steps
below.
1. Tap the screen to bring up the main menu.
2. Tap Navigate to...
3. Tap Address.
Now you have to specify where you want to
go. This is done by selecting first the town,
then the street and then either the house
number or the point where two streets meet.
Note: If you know the postcode of your destination,
you can enter this instead of the address. From the
Navigate to... menu, tap Postcode. Then enter the full
postcode.
4. Start to type the name of the town where you
want to go.
After you have typed a few letters, the
names of towns that match what you have
typed are shown. When your destination is
shown in the list, tap the name of the town to
set the destination.
6
5. Start to type the name of the street.
As with the name of the town, the names of
streets that match what you have typed are
shown. When your destination is shown in
the list, tap the name of the street to set the
destination.
6. Now do one of the following:
• Enter the house number of your
destination and then tap Done.
• To select a point where two streets meet,
tap Crossing and select the name of the
street as in step 5.
The route is calculated by your TomTom ONE.
7. When the route has been calculated, tap
Done. Your TomTom ONE will immediately
start giving you instructions for reaching
your destination.
To guide you to your destination, TomTom ONE
will give you spoken instructions and visual
instructions on the screen.
Note: Before you can plan a route in this way, your
TomTom ONE must first locate your current position.
For more information about navigating, see the
manual on the CD.
Making your first journey
7
EN