Network - Nokia 7088 User Manual

N7088_EN_RUIM_for MEA_clean_021207.fm Page 70 Monday, February 12, 2007 11:20 AM
S e t t i n g s
Access codes
You can change your device access codes and PIN code. In the standby
mode, select Menu > Settings
one of the following options:
Change security code—Change the security code to a new one (default is
12345).
Change PIN code—Change the PIN code to a new one (unavailable when
PIN code request is off).
Voice privacy
Voice privacy is a network service. See "Network services" p. 71. If your
wireless service provider supports this feature, the voice privacy feature
protects the privacy of your current phone conversation from other
callers placing phone calls on your same network. In the standby mode,
select Menu > Settings
Personal unblocking key (PUK) code
The PUK code is used to restore a blocked PIN code. The PUK code is 8
characters in length and cannot be changed. The PUK code must be
obtained from your wireless service provider.
Important: If you enter an incorrect PUK code 10 times in
succession, the UIM card is rejected and can no longer be used.
You must contact your wireless service provider for a new UIM
card.

■ Network

The menu options you see in your device depend on your service
provider's network. The network determines which options actually
appear in the device menu. Check with your service provider for more
information.
The Network menu enables you to customize the way your device
chooses a network in which to operate while you are within or outside
of your primary or home system. Your device is set to search for the
70
> Security > Access codes. Then choose
> Security > Voice privacy > On or Off.