Nokia 7088 User Manual page 35

N7088_EN_RUIM_for MEA_clean_021207.fm Page 34 Monday, February 12, 2007 11:20 AM
M e s s a g e s
Save voice mailbox number
Your wireless service provider may have already saved your voice
mailbox number to your device. Select
unchanged.
1. In the standby mode, select
Voice mailbox number. The mailbox number is displayed.
2. If the box is empty, enter the voice mailbox area code and number,
and select OK.
Call and setup voice mail
1. After you save the voice mailbox number, in the standby mode, press
and hold 1.
2. When you connect to voice mail and the prerecorded greeting
begins, follow the automated instructions to setup voice mail.
Listen to voice messages
After you set up voice mail, in the standby mode, press and hold 1; or
select Menu > Messages
dial the voice mailbox number. When you connect and the prerecorded
greeting begins, follow the automated instructions to listen to your
voice messages.
Automate voice mail
You can insert special characters called dialling codes into phone
numbers such as voice mail, and save the number to a speed dialling
location. Dialling codes instruct the receiving system to pause, wait,
bypass, or accept the numbers that follow them in the dialling string.
See "Phone numbers with dialling codes" p. 35.
Voice mail services vary by wireless service provider. The following
instructions are examples of common operations. Please check with
your wireless service provider for specific instructions on using your
voice mail service.
34
OK to leave the number
Menu > Messages > Voice messages
> Voice messages > Listen to voice messages
>
to