Answer Calls - Nokia 7088 User Manual

N7088_EN_RUIM_for MEA_clean_021207.fm Page 19 Monday, February 12, 2007 11:20 AM
1. Make a call to the first participant.
2. With the first participant on the line, select
3. Enter the phone number of the second participant, or select
to retrieve a number from the contacts list. Select Call. The first
participant is put on hold.
4. When the second participant picks up, press the call key to connect
the calls.
5. To end the conference call, select
power/end key.

■ Answer calls

An incoming call
1. Press the call key, or select
2. Press the power/end key to reject the call.
Select Silence to mute the ringing tone, then Dismiss, or do nothing.
With your device set to silent in the profiles menu, select
reject the incoming call.
3. Press the volume key to mute the ringing tone.
By default, your phone answers an incoming call when you open the
slide. You can change the setting to not answer the call when the slide
opens.
In the standby mode, select
> Open slide to answer calls
Adjust the earpiece volume
At any time, you can press the volume key located on the right side of
your device up or down to adjust the volume of the earpiece. When you
adjust the volume, a bar chart indicates the volume level.
S e t u p y o u r d e v i c e
Options >
Options > End all calls, or press the
Answer to answer the call.
Menu > Settings > Call > Slide call handling
> On or Off.
New call.
Search
Dismiss to
19