Nokia 7088 User Manual page 36

N7088_EN_RUIM_for MEA_clean_021207.fm Page 35 Monday, February 12, 2007 11:20 AM
Phone numbers with dialling codes
Dialling codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialling string. To set up
dialling codes, do the following:
1. In the standby mode, select
2. Scroll to an (empty)
3. Enter your mailbox phone number, including the area code.
4. Enter any dialling codes as necessary after the entered phone
number.
For example, if you pause for 5 seconds after connecting to voice
mail, enter p twice (two times 2.5 seconds) after the voice mailbox
number: 2145551212pp.
5. Enter any remaining pauses or other information that enables you to
listen to your messages, and select OK.
6. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, press and hold the assigned speed
dialling key in the standby mode.
Insert dialling codes
Press * repeatedly to cycle through dialling codes. When the desired
code appears in the display, pause briefly and the code is inserted into
the dialling string.
The following dialling codes are available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before sending any numbers that follow.
+—Replaced by the international access code.
w—Waits for you to press the center selection key before sending the
numbers or codes that follow.
Clear voice mail icon
To clear the voice mail icon from the display, in the standby mode, select
Menu > Messages > Voice messages
Menu > Contacts > Speed
speed dialling slot, and select Assign.
> Clear voice message
M e s s a g e s
dials.
icon.
35