Adjusting The D-Beam Sensitivity (D-Beam Sensitivity) - Roland V-combo VR-09 Reference Manual

Detailed Settings for All Functions (Menu)
Category Parameter
D-BEAM Sensitivity
Controller
Modulation Lever
Registration Shift
PK Setting
L Foot Switch,
R Foot Switch
N.Control
Save Registration
Load Registration
Media
Load One Regist
Utility
Delete Registration
Format USB
50
Value Explanation

Adjusting the D-BEAM Sensitivity (D-BEAM Sensitivity)

This adjusts the sensitivity of the D-BEAM controller.
Higher values make the D-BEAM controller more responsive.
1–10
Using the Modulation Lever to Switch the Rotary Effect
(Modulation Lever)
You can select the rotary effect that is controlled by the modulation lever.
* This applies only when you're playing organ sounds.
OFF The modulation lever will not turn the rotary effect on/off.
ROTARY ON/OFF Moving the modulation lever away from yourself will turn the rotary effect on/off.
When Rotary Type (p. 46) is "TYPE2" or "TYPE3, " moving the modulation lever away from yourself
ROTARY BRAKE stops the rotation of the rotary effect. In contrast to simply turning the effect on/off, this preserves
the cabinet resonance of the rotary speaker.
Using a Footswitch to Change Registrations (Registration Shift)
You can assign the footswitch of the pedalboard (PK-9; sold separately) to switch consecutively through registrations.
OFF
The function assigned to the footswitch (L Foot Switch and R Foot Switch settings) will be available.
The right footswitch will be dedicated to switching registrations.
RIGHT
* The function assigned to the right footswitch (R Foot Switch setting) will be unavailable.
The left footswitch will be dedicated to switching registrations.
LEFT
* The function assigned to the left footswitch (L Foot Switch setting) will be unavailable.
Changing the Function of the Footswitches (L Foot Switch, R Foot
Switch)
You can select the functions that are assigned to the footswitches of the pedalboard (PK-9; sold separately).
ROTARY FAST/SLOW Switch the rotary speed between "FAST" and "SLOW. "
RHYTHM START/STOP Start/stop the rhythm pattern.
SONG START/STOP
Same function as the [
DAMPER OF UPPER
Notes played in the upper part will be sustained while you continue holding the footswitch.
DAMPER OF LOWER Notes played in the lower part will be sustained while you continue holding the footswitch.
N. CONTROL1
You can produce richer and more realistic performance expressions by applying various effects to
acoustic sounds.
N. CONTROL2 For details on these effects and on the acoustic sounds to which they can be applied, refer to
"Applying effects to specific acoustic sounds" (p. 53).
OFF Turn off the footswitch function.
Selecting the Part(s) Affected by the Acoustic Sound Effect (N.Control)
You can select the part(s) that will be affected when you use the footswitches of a pedalboard (PK-9; sold separately) to activate
an effect for acoustic sounds (p. 53).
to ALL
The effect will be applied to the upper part and the lower part.
to LOWER The effect will be applied to the lower part.
to UPPER
The effect will be applied to the upper part.
All registrations stored in this unit can be saved to your USB flash drive.
REFERENCE
For details, refer to "Saving Registrations to a USB Flash Drive (Save Registration)" (p. 41).
Load a registration set saved on a USB flash drive into this unit.
REFERENCE
For details, refer to "Loading Saved Registrations from a USB Flash Drive (Load Registration)" (p. 42).
Loads a single registration saved on a USB flash drive into this unit.
REFERENCE For details, refer to "Individually Loading Registrations from a USB Flash Drive (Load One Regist)" (p. 42).
Delete a registration set saved on a USB flash drive.
REFERENCE
For details, refer to "Deleting Saved Registrations from a USB Flash Drive (Delete Registration)" (p. 43).
This formats (initializes) a USB flash drive for use with this unit.
REFERENCE
For details, refer to "Formatting a USB Flash Drive (Format USB)" (p. 43).
For details about how to make menu
settings, see p. 45.
] (START/STOP) button.