HP Aruba 3810M Series Installation And Getting Started Manual page 16

Table 9 Port LEDs and Mode Behavior (continued)
Switch LEDs
Speed Mode Selected
PoE Mode Selected
User Mode Selected
16 Introducing the 3810M switches
Function
Port LEDs are displaying
the connection speed at
which each port is
operating.
Port LEDs are displaying
PoE information.
Mode currently active only
in stacked configurations.
Used to display the number
of members in a stack and
their current status.
The status information is
sticky and if a unit's status
changes while in USER
mode, you must exit and
re-enter USER mode to get
the updated status.
State/Mode
Slow Flash Orange*
Off
Fast Flash Green**
On Green
Triple Blink Green
Double Blink Green
Slow Flash Green*
Off
On Green
On Orange
Fast Flash Orange**
Slow Flash Orange*
Off
On Green
Slow Flash Green*
Fast Flash Green**
On Orange
Meaning
The corresponding port has
failed its self-test. Flashes
simultaneously with the
Global Status LED flashing
orange.
The Port is disabled, not
connected, or not receiving
link.
The port is operating at 40
Gbps.
The port is operating at 10
Gbps.
The port is operating at 5
Gbps. (HPE SMART RATE
ports only)
The port is operating at 2.5
Gbps. (HPE SMART RATE
ports only)
The port is operating at 1
Gbps.
The port is not Linked, or is
operating at 10 or 100
Mbps.
The port is providing PoE
power.
PoE is disabled on the port.
The port is denied power or
is detecting an external PD
fault.
The port has an internal
hardware failure. Flashes
simultaneously with the
Global Status LED flashing
orange.
The port is not providing
PoE power.
Stack Member exists in the
stack and is operational.
Indicates the Member # of
the chassis.
Indicates the Member # of
the Commander of the
stack.
Stack Member is currently
booting or has a fault that is
preventing it from
communicating.