HP Aruba 3810M Series Installation And Getting Started Manual page 13

Table 7 Switch and Port LEDs Label and Description for JL075A
Label
1
2
3
4
5
6
7
8
9
10
Table 8 Front of Switch Status and Mode LED Behavior
Switch LEDs
Global Status
UID (Unit Identification)
Back Module Status
Switch Port LEDs
LED Mode button
Speed LED
Usr LED
Reset button
Clear button
Back Module status LED
Aux Port status LED
Unit Identification LED
Global status LED
Function
Internal Power Status of
the switch.
Self-Test Status
Switch/Port Fault Status
The Unit Identification LED
is used to help you to
identify a particular unit in
a rack or collection of
products.
Status of modular
components installed in
the back of the unit.
Description
State
On Green
Slow Flash Green*
Slow Flash Orange*
On Orange
Off
On or Slow Flash**
Off
On Green
Slow Flash Orange*
Meaning
The Switch has passed self-test
and is powered up normally.
The switch self-test and
initialization are in progress
after the switch has been power
cycled or reset. The switch is
not operational until this LED
stops blinking green.
A fault or self-test failure has
occurred on the switch, one of
the switch ports, a module in
the rear of the switch, or the
fan. The Status LED for the
component with the fault will
blink simultaneously.
If this LED is on orange for a
prolonged time, the switch has
encountered a fatal hardware
failure, or has failed its self-test.
The unit is not receiving power.
The "chassislocate" command
allows you to blink or turn on
the LED for a specified number
of minutes (1-1440). The default
is 30 minutes.
LED will turn off after the
timeout period has expired.
Normal operation: All modular
components installed in the
back of the unit are functioning
correctly.
One of the modules inserted
from the back of the chassis
(power supply, fan tray, or
Front of the Switches 13