HP Aruba 3810M Series Installation And Getting Started Manual page 14

Table 8 Front of Switch Status and Mode LED Behavior (continued)
Switch LEDs
Aux Port Activity
Flex Port Module Status
Speed Mode Selected
Power over Ethernet (PoE)
Mode Selected***
14 Introducing the 3810M switches
Function
Indicates data transfer on
the Aux Port which is used
for processing a USB
command file or
downloading switch
software code.
Status of Flex Port
module.
Indicates when the Port
LEDs are showing port
speed information.
Indicates when the Port
LEDs are showing PoE
status information.
State
Solid Green
Green Flicker
Slow Flash Orange*
Off
On Green
Slow Flash Orange*
Fast Flash Orange**
Off
No Present
On
Off
On Green
On Orange
Slow Flash Orange*
Meaning
stacking module) has failed self
test or is experiencing a fault
condition. Flashes
simultaneously with the Global
Status LED flashing orange.
USB installed and successfully
initialized, and mounted, but no
data transfer.
Data transfer is in progress. Do
not remove installed device until
data transfer is complete
The USB device that is installed
is unsupported or faulted.
No USB installed.
Flex Port module operating
correctly.
Flex Port module has
experienced a fault.
The Global Status LED should
be flashing synchronously.
Flex Port module or one or
more of its ports is/are
experiencing an alert condition.
Alert conditions include that an
unsupported cable has been
installed in the module or that
the Flex Port module has been
installed while the switch was
powered on (hot-swapped) and
the switch needs to be rebooted
to support the module.
No power.
No Module
Speed Mode is selected. Port
LEDs indicate port speed.
Speed mode not selected.
PoE Mode is selected. Port
LEDs show PoE information.
PoE Mode is selected and a
port also has a PoE error. The
Global Status LED and the LED
corresponding to the port with
the error will be flashing orange.
The rest of the Port LEDs will
display normal PoE status.
PoE Mode has NOT been
selected and a port has a PoE
error. LED will be flashing
orange simultaneously with the
Global Status LED and the LED
corresponding to the port with