Configuring A Switch To Obtain And Process Mac Address-Table Move Update Messages - Cisco Catalyst 2960-XR Configuration Manual

Configuring Flex Links and the MAC Address-Table Move Update Feature
Command or Action
Step 4
end
Example:
Switch(config-if)# end
Step 5 mac address-table move update transmit
Example:
Switch(config)#
mac address-table move update
transmit
Step 6 end
Example:
Switch(config)# end
Related Topics
Configuring the MAC Address-Table Move Update: Examples, on page 163
Monitoring Flex Links and the MAC Address-Table Move Update, on page 160
MAC Address-Table Move Update, on page 151
Restrictions for Configuring Flex Links and MAC Address-Table Move Update, on page 147
Configuring the MAC Address-Table Move Update: Examples, on page 163

Configuring a Switch to Obtain and Process MAC Address-Table Move Update Messages

SUMMARY STEPS
1. configure terminal
2. mac address-table move update receive
3. end
DETAILED STEPS
Command or Action
Step 1 configure terminal
OL-29424-01
Purpose
Returns to global configuration mode.
Enables the access switch to send MAC address-table move updates
to other switches in the network if the primary link goes down and
the switch starts forwarding traffic through the standby link.
Returns to privileged EXEC mode.
Catalyst 2960-XR Switch Layer 2 Configuration Guide, Cisco IOS Release 15.0(2)EX1
Configuring MAC Address-Table Move Update
Purpose
Enters global configuration mode
159