Monitoring The Spanning-Tree Status; Additional References For Optional Spanning Tree Features - Cisco Catalyst 2960-XR Configuration Manual

Monitoring the Spanning-Tree Status

Command or Action
Step 4
end
Example:
Switch(config)# end
Related Topics
Loop Guard, on page 90
Monitoring the Spanning-Tree Status
Table 14: Commands for Monitoring the Spanning-Tree Status
show spanning-tree active
show spanning-tree detail
show spanning-tree interface interface-id
show spanning-tree mst interface
interface-id
show spanning-tree summary [totals]

Additional References for Optional Spanning Tree Features

Related Documents
Related Topic
Layer 2 commands
Catalyst 2960-XR Switch Layer 2 Configuration Guide, Cisco IOS Release 15.0(2)EX1
102
Configuring Optional Spanning-Tree Features
Purpose
Returns to privileged EXEC mode.
Displays spanning-tree information on active interfaces only.
Displays a detailed summary of interface information.
Displays spanning-tree information for the specified interface.
Displays MST information for the specified interface.
Displays a summary of interface states or displays the total
lines of the spanning-tree state section.
Document Title
Catalyst 2960-XR Switch Layer 2
Command Reference
OL-29424-01