Configuring Vlan Load Balancing On Flex Links - Cisco Catalyst 2960-XR Configuration Manual

Configuring Flex Links and the MAC Address-Table Move Update Feature
Configuring Flex Links: Examples, on page 161

Configuring VLAN Load Balancing on Flex Links

SUMMARY STEPS
1. configure terminal
2. interface interface-id
3. switchport backup interface interface-id prefer vlan vlan-range
4. end
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2 interface interface-id
Example:
Switch (config)# interface
gigabitethernet2/0/6
Step 3 switchport backup interface interface-id prefer
vlan vlan-range
Example:
Switch (config-if)# switchport backup
interface
gigabitethernet2/0/8 prefer vlan 2
Step 4 end
Example:
Switch (config-if)# end
Related Topics
Flex Links VLAN Load Balancing Configuration Guidelines, on page 153
Restrictions for Configuring Flex Links and MAC Address-Table Move Update, on page 147
OL-29424-01
Purpose
Enters global configuration mode.
Specifies the interface, and enters interface configuration mode.
The interface can be a physical Layer 2 interface or a port
channel (logical interface). The port-channel range is 1 to 48.
Configures a physical Layer 2 interface (or port channel) as
part of a Flex Links pair with the interface and specifies the
VLANs carried on the interface. The VLAN ID range is 1 to
4094.
Returns to privileged EXEC mode.
Catalyst 2960-XR Switch Layer 2 Configuration Guide, Cisco IOS Release 15.0(2)EX1
Configuring VLAN Load Balancing on Flex Links
157