Canopy ＆ Hatch - FUTABA Big SkyLeaf Instruction Manual

14 Canopy ＆ Hatch
1
● Cut the unnecessary part of the canopy with scissors.
2
● Adhesion of the canopy should use elastic
silicone or rubber adhesive.
● Fix the Canopy with a Masking tape until the
adhesive is solidified.
● Glue it.
！ Be careful not to adhere adhesive to the transparent
part of the canopy.
20
● Ruff up the adhesive part with
sandpaper to help the glue
stick to the horn.
2 3
● Install Canopy & Hatch on Fuselage. Remove it
when removing main wing or exchange the battery.
● Insert the Dowel into
the Dowel hole in the
front fuselage.
● Fit the M3 × 10 Hex
screw and M3 Washer