FUTABA Big SkyLeaf Instruction Manual page 17

3
● Mount the throttle servo according to the throttle position of your engine.
● Open the throttle rod hole.
● Open the hole to
enter the servo on
the wood plate.
4
● Attach the igniter (engine included) with
Hook-and-Loop Tape and connect it with the
plug.
● Igniter (engine included)
9
Silencer
1
● Install a Long silencer as shown.
● Install it on the fuselage with a silencer
attachment (Silencer accessories).
● Throttle
adjuster
● Servo tapping screws 4 pieces
5
● Install the Fuel tank to the fuselage with Hook-
and-Loop Tape, and piping of fuel.
● Fuel tank
！ Use fuel tanks and fuel pipes for
gasoline. Do not use for glow.
● Long silencer space
Set screw
Throttle adjuster
washer
Servo horn
washer
M2 Nut
● Throttle rod
17