Washing Cycle Complete/Removing The Washing - Electrolux Swissline SL EWF 1880 User Information

1. Press the PAUSE key. The
2. Open the door.
3. Add washing, close the door again.
4. Press the START key.

Washing cycle complete/Removing the washing

At the end of the programme PLEASE TAKE OUT THE CLOTHES appears in
the display. As soon as the
1. Open the door using the handle.
2. Remove the washing.
3. Switch off the appliance.
If Rinse Hold has been selected:
1. Press the START key.
The display automatically chang-
es to the first programme page.
Depending upon the programme
that has been running either SPIN
or SHORT SPIN is highlighted.
If spinning or draining is required:
Use the control knob to highlight
either
– SPIN or
– DRAIN.
2. Reduce the spin speed, if nec-
essary.
3. Press the START key.
The washing is spun or the water is drained.
3
If OVERDOSING is shown in the display at the end of a wash cycle, too
much detergent was used in the completed wash programme. Please take
note of the dosage instructions provided by the detergent manufacturer and
the amount of washing loaded the next time you wash.
symbol appears in the display.
§
symbol appears, the door can be opened.
RINSE HOLD
START
RINSE H.
1200 RPM
START
1200
OPTIONS
1200 RPM
START
1200
OPTIONS
DELICATES 30°C
11:28-11:28
§
RINSE HOLD
######################
SHORT SPIN
12:28-12:34
ú
EASY IRON
REFRESH
FASHION
SHORT SPIN)
SPIN
SPIN
11:28-11:39
ú
FASHION
SHORT SPIN
SPIN)
STARCH
DRAIN
21