Opening The Door/Loading The Washing - Electrolux Swissline SL EWF 1880 User Information

Opening the door/Loading the washing

1. To open the door: carefully pull the handle on the door.
2. Unfold the washing and load it loosely
into the machine. Mix large and small
items.
Important: Do not get any washing
caught between the door and the rub-
ber seal.
3. Push the door firmly shut.
CURRENT LOAD/DETERGENT display
3
If settings are not undertaken for
several seconds during the pro-
gramme setting process or when
loading with laundry, the follow-
ing indicators appear on the dis-
play when the machine door is
open:
– the maximum permissible loading for the programme marked,
– the actual loading. This is also displayed by the bars (loads of less than
0.5kg are not displayed),
– and washing agent measurement, with reference to the volume of laundry,
as recommended by the washing agent manufacturer.
If too much laundry has been loaded into the machine, the following indica-
tor appears in the display OVERLOADING. Please remove the relevant
amount of laundry in such cases.
Press any button or turn any knob to undertake more programme settings.
3
If the laundry is removed again before the programme starts, the CURR.
LOAD display may not change back to 0. If this occurs, please turn the ma-
chine off and switch it back on again after approx. 3 seconds. Reset the
programme and refill machine with laundry.
The CURR. LOAD display goes out if the machine is closed.
18
DELICATES 30°C
1000 RPM 11:25-12:36
##################======]
MAXIMUM LOAD 2,5 KG
CURR. LOAD¶¶¶¶¶ 1,5 KG
DETERGENT ¶¶¶¶¶¶¶¶¶¶75 %
§