Smooth Fitness 9.17HRO User Manual page 13

13
SMOOTH 9.17HRO MOTORIZED TREADMILL
ASSEMBLY
STEP 2:
First connect the wires between Left Upright (30) and Base Frame (55). Rotate up the Left Upright (30) and Right
Upright (36) then secure it to the Base Frame (55) with four M8 x 15mm Allen Head Screws (19).
NOTE: Make sure all wires are recessed into the frame, do not trap any of the wires. Do not fully tighten screws (19)
at this point. You may find it easier to stand on the bed of the treadmill to perform this part of the assembly.
30
36
19
19
55
138
139
30
140
55
141
143
142
Visit us at: www.smoothfitness.com