Smooth Fitness 9.1 SERIES Owner's Manual page 6

7. Place the treadmill in operating position. Make certain cables from upper computer
do not come in contact with motor fan. Apply AC power. Start the unit and observe
belt tracking. Unit must be reasonably level for proper tracking. Test treadmill basic
operation. This includes noise, motor performance, etc.
8. Remove (2) black phillips head screws located on each side near console upright.
Install motor hood and secure with both black phillips head screws.
Before using:
1. Follow the belt tracking instructions closely in order to ensure proper belt tension
and path.
2. Walk on the belt at slow speeds under 2.5 mph for a few minutes in order to break in
the belt/deck lubricant.
3. Make certain treadmill is electrically grounded.
Contact Smooth
Service
Sales
1-800-258-4555
1-800-TREADMILL
Sales@InternetFitness.com
Page 6