E-Mail - Pantech A100 User Manual

Message Lifetime:
Allows you to set the duration of time your message is stored at the
message centre while attempting to deliver it.
Auto Download:
Specifies whether you receive multimedia messages automatically on your
phone or you are notified of receiving a multimedia message. Press the
[ ] or [ ] scroll key to select either On or Off.
Save Message:
Specifies whether multimedia messages are saved in the Sent Box after
they are sent. Press the [ ] or [
Off.
Read Report:
Demands the reader of the message to send 'Read Report' to the message
sender.
Delivery Report:
: Set the network to inform you when messages have been delivered.
Press the [ ] or [ ] scroll key to choose either On or Off.
•

E-mail

Before you can send and receive e-mail messages, you must configure the
following settings.
] scroll key to select either On or
Max. Message Download Size:
Defines the maximum size of e-mail messages downloaded. If the e-mail
message is larger than the specified size, it will be truncated. Press the
[ ] or [ ] scroll key to select between Header Only, 30KB, 60KB,
100KB, and 300KB.
E-mail Accounts:
Specifies the list of e-mail accounts. Press the [
rename, set as the default, or edit the selected account. The default
account is the account which is used to send e-mails. The default account
cannot be deleted. When you choose to edit an account, you can configure
the settings below.
You can also create a new account.
•
User Display Name: The name which appears in sent e-mail headers.
•
E-mail Address: Your e-mail address.
•
Username: The ID used to sign in to the e-mail server.
•
Password: The password used to sign in to the e-mail server.
•
Data Connection: The Internet data connection used to connect to the
e-mail server.
GPRS: Select this item then press the [Edit] Soft key to edit the
APN Name, User ID, and Password.
CSD: Select this item then press the [Edit] Soft key to edit the Dial
Number, User ID, Password, and Modem Type (ISDN or Analog).
•
Incoming Server: The POP3 or IMAP4 server used to receive e-mail.
•
Outgoing Server: The SMTP server used to send e-mail.
] key to delete,
50