Multimedia Msg - Pantech A100 User Manual

message is saved in the other storage location. Press the [
[ ] scroll key to choose either Phone or SIM.
•
Save Message: Specifies whether the completed message is saved in
the Sent Box after it is sent. Press the [
choose either On or Off.
•
Delivery Report: Set the network to inform you when messages have
been delivered. Press the [
On or Off.
•

Multimedia Msg.

Before you can send and receive multimedia messages, you must
configure the following settings.
MMS Profile:
•
Profile Name: Input the profile name.
•
Home URL: Input the connection URL.
•
Connection Type: Select WAP or HTTP.
•
GSM Settings
Gateway
- IP Address: The IP address. A point is added after every 3
digits.
- IP Port: The IP port number.
Login ID: The ID used to sign in to the gateway.
-
] or [ ] scroll key to
] or [ ] scroll key to choose either
Password: The password used to sign in to the gateway.
-
] or
Data Call Type : Press the [
either ISDN or Analog.
Dial Number: The dial number.
Login ID: The ID to sign in via GSM.
Password: The password used to sign in via GSM.
•
GPRS Settings
Gateway
- IP Address: The IP address. A point is added after every 3
digits.
IP Port: The IP port number.
-
Login ID: The ID used to sign in to the GPRS service.
-
Password: The password used to sign in to the GPRS
-
service.
APN: The Access Point Name.
Login ID: The ID used to sign in to the GPRS service.
Password: The password used to sign in to the GPRS service.
•
DNS Settings: The IP addresses for the Domain Name Servers. You
can enter the primary and secondary DNS. This function is available
only when you are connected to HTTP.
•
Bearer: Press the [
Only or GSM Only.
] or [ ] scroll key to choose
] or [ ] scroll key to select either GPRS
49