Daikin FTXS-L Series Engineering Data page 55

Operation Manual
Operating conditions
•
If the indoor unit's internal clock is not set to the correct time, the WEEKLY TIMER will not operate punctually.
Tips for saving energy
•
Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
•
Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) effect.
•
Clogged air fi lters cause ineffi cient operation and waste energy. Clean them once in about every 2 weeks.
Please note
•
The air conditioner always consumes a small amount of electricity even while it is not operating.
•
If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker off.
•
Use the air conditioner in the following conditions.
Mode Operating conditions
Outdoor temperature : 50-115°F (10-46°C)
COOL Indoor temperature : 64-90°F (18-32°C)
Indoor humidity : 80% max.
Outdoor temperature : 5-75°F (–15-24°C)
HEAT
Indoor temperature : 50-86°F (10-30°C)
Outdoor temperature : 50-115°F (10-46°C)
DRY Indoor temperature : 64-90°F (18-32°C)
Indoor humidity : 80% max.
•
Operation outside this humidity or temperature range may cause a safety device to disable the system.
54
Checks on remote controller settings
• This remote controller is common to the heat pump model and cooling only
model. Use the DIP switch on the remote controller to set the heat pump
model or cooling only model.
• Refer to the following explanation and make the setting as shown in the
illustration.
• For customers of heat pump model: Set to H/P
• For customers of cooling only model: Set to C/O
To set the clock
1.
Press .
2.
Press to set the current day of the week.
3.
Press .
4.
Press to set the clock to the present time.
• Holding down or rapidly increases or decreases the time display.
5.
Press .
• Point the remote controller at the
indoor unit when pressing the buttons.
Recommended temperature setting
For cooling: 78-82°F (26-28°C)
For heating: 68-75°F (20-24°C)
If operation is continued out of this range
•
A safety device may work to stop the operation.
•
Condensation may occur on the indoor unit and drip.
•
A safety device may work to stop the operation.
•
A safety device may work to stop the operation.
•
Condensation may occur on the indoor unit and drip.
Split Type Air Conditioners FTXS-L Series
EDUS041129
DIP switch
H/P C/O
" " is displayed.
" " and " " blinks.
" " blinks.
" " blinks.
9