Daikin FTXS-L Series Engineering Data page 67

Operation Manual
NOTE
In the following cases, set the timer again.
•
After a breaker has turned off.
•
After a power failure.
•
After replacing batteries in the remote controller.
66
To use ON TIMER operation
• Check that the clock is correct.
If not, set the clock to the present time.
1.
Press .
" " is displayed.
" " blinks.
" • " and day of the week are no longer displayed on the LCD.
2.
Press until the time setting reaches the point
you like.
• Each pressing of either button increases or decreases the time setting by 10 minutes.
Holding down either button changes the time setting rapidly.
3.
Press again.
" • " and setting time are displayed on the LCD.
• The TIMER lamp lights yellow.
Display
To cancel ON TIMER operation
Press .
" • " and setting time are no longer displayed on the LCD.
" • " and day of the week are displayed on the LCD.
• The TIMER lamp goes off.
To combine ON TIMER and OFF TIMER
• A sample setting for combining the 2 timers is shown below.
(Example)
Present time: 23:00 (The unit operating)
OFF TIMER at 0:00
Combined
ON TIMER at 14:00
Page 9
Split Type Air Conditioners FTXS-L Series
EDUS041129