Introduction; Ordering Parts; Fryer Capacities; Unpacking - Saturn SF SERIES User Manual

GENERAL
Saturn Fryers are produced with quality workmanship and materials.
Proper installation, usage and maintenance will result in years of satisfactory performance.
Before installing the fryer, thoroughly read this manual and carefully follow all instruction.
This manual is applicable to model listed on the cover page.
Procedures in this manual will apply to all models unless specified. Pictures and illustrations can be of
any model unless the picture or illustration needs to be model specific.
Customers may order parts directly from their local authorized service center.
If not known, call Saturn Equipment, Primoris Inc. Customer Service at
5760 Greenwood Plaza Blvd. Suite 501. Greenwood Village, Colorado 80111-2409 USA.
To speed up your order, provide the model number, serial number, gas type, item part number
and quantity required.
Model
#of Heat
Tubes
NG
SF40
Propane
NG
SF50
Propane
NG
SF70
Propane
This fryer was carefully inspected before leaving the factory. Upon acceptance of the shipment,
the transportation company assumes full responsibility for safe delivery.
Immediately after unpacking the fryer, check for possible shipping damage. If the fryer is
damaged, save the packaging material and contact the carrier within 15 days of delivery.
Check that the following have been included:
Crumb Rack
Basket Hanger
Adjustable Legs (4)
Do not use the door or its handle to lift

INTRODUCTION

ORDERING PARTS

FRYER CAPACITY
Orifice (mm)
3 39 (2.5)
3 43 (1.6)
4 39 (2.5)
4 43 (1.6)
5 39 (2.5)
5 43 (1.6)

UNPACKING

BTU/hr. Width Inch (cm)
90,000 15.5 (39)
90,000 15.5 (39)
120,000 15.5 (39)
120,000 15.5 (39)
150,000 21.0 (53)
150,000 21.0 (53)
Drain Pipe Extension
Twin Fry Baskets (2)
Manual and Warranty
3
,
1-303-801-0680
Shortening lbs.
(kg)
35-40(16-18)
35-40(16-18)
45-50(21-23)
45-50(21-23)
65-70(29-32)
65-70(29-32)