Do not move fryer without draining all frying compound from the tank.
The fryer should be restrained to prevent tipping when installed in order to avoid the
The means of restraint may be the manner of installation, such as connection to a battery of appliances or
installing the fryer in an alcove, or by separate means, such as adequate ties.
When the fryer is cool, inspect annually. Check the flue and clear any obstructions.
Service in the US and Canada
Contact you local Saturn Service office or address on the front of this manual.
Problem:
No Heat:
Insufficient or too much heat:
Tank will not drain:
Hot oil and hot parts can cause burns.
Use carefully when operating, cleaning, and servicing the fryer.
Spilling hot fryer compound can cause severe burns.
splashing of hot liquid.
FLUE VENT INSPECTION
Troubleshooting Chart:
MAINTENANCE
Probable Cause:
Thermostat dial not turned on.
Pilot not lit.
Gas supply not turned on.
Wire connections loose (call service)
Wires connections need cleaning (call service)
Thermopile (call service technician)
Thermostat dial not set to desired temperature.
High limit tripped (call service technician)
Temperature probe (call service technician)
Shortening too cold.
Drain pipe clogged with debris.
18