John Lewis Mixit Assembly Manual page 10

Step by step assembly instructions
Step Twelve
To prevent possible overbalancing we recommend that this unit is secured to a suitable wall by use of two 'L'
Brackets (M) fitted to the Top of the unit.
1.
Fix the Brackets (M) loosely onto the top of the unit using spacer (L) screw (I) and mark the wall for the wall fix-
ing.
2. Swivel the Bracket (M) away from the wall and drill a hole in the wall using a suitable drill bit and fit your wall
fixing.
3.
Swivel the Bracket (M) back and fix the Bracket to the wall, then tighten Screw (I)
Take care when drilling the wall that you do not drill into any pipes, wires etc. If in doubt, consult an expert.
M
L
Wall plug and screw not included. See wall fixing guide at page 14.
I
Wall plug
and screw
not included.
Please see
Guide to
wall mounting
! IMPORT NT !
I
M
L
Page 10
MXT 01/13