Smeg Oven 9FBYON Instruction Manual page 5

Instructions for the installer
2.2 Positioning the oven
The oven is designed for mounting into any piece of furniture as long as it
is heat-resistant. Proceed according to the dimensions shown in Figures 1
and 2.
Fixing is carried out using 4 screws at
the corners "C" of the oven door frame,
after removing the side panels secured
by the screws "A" and the supports "B"
as shown in figure 3. To replace the
side panels, take care to engage the
pins inside them correctly with the
supports "B", then retighten the screws
"A".
Never use the oven door to lever the oven into
place when fitting.
Avoid exerting too much pressure on the oven door
when open.
3.
27