Table of Contents
Advertisement
Instructions for the installer
2.3 Mounting the oven
The oven is designed for mounting into any piece of kitchen furniture
being heat-resistant. Proceed according to the dimensions shown in
Figures 1, 2 and 3. For installing under a work top, follow the dimensions
given in Figure 1-3. For installing under a work top with combined heating
plates, ensure a minimum clearance from any side walls of at least 110
mm as shown in Figure 1.
For installing in a column, follow the dimensions given in Figure 1-2
allowing for a clearance of 80 to 90 mm at the top and sides of the
column. Tighten the four screws A inside the frame to secure (Fig. 1).
For installing beneath a non-integrated top, allow for a rear and bottom
clearance as shown in Figure 1 (ref. B). See relevant instructions for
fitting and securing the cook top.
8
Advertisement
Table of Contents
