Beaming From One Neo To Another - Alphasmart NEO2 SmartApplet User Manual

Be aming f r om One NEO to A n ot her
Make sure you have
used AlphaWord
Plus at least once on
the device that will be
receiving the beam. This
initializes the program.
If you choose a file
that is protected by
an individual
password, you will be asked
to enter that password before
you can send the file. You can
enter the file password or the
master password. For more
on password protection, see
page 4-4.
You can beam AlphaWord or AlphaWord Plus files between two AlphaSmart
devices as long as both devices have infrared ports and are within three feet of
each other. You can send the files from NEO to NEO, NEO to AS3000, or
AS3000 to NEO.
Follow the steps below to beam an AlphaWord or AlphaWord Plus file
between NEOs. Note: If you are working in AlphaWord Plus, you can beam a
file without leaving it; see page 6-6.
On the sending device:
1. Make sure you know which AlphaWord or AlphaWord Plus file contains
the data you want to send.
2. Turn on the NEO by pressing on/off.
3. Press applets to view the SmartApplets menu.
↓
4. Press to scroll down and move the cursor next to Beamer in the list;
then, press enter. The Beamer screen appears.
Select a Beaming function:
- Send
- Receive
- Settings
5. On the device from which you want to beam, move the cursor next to
Send and press enter. (If Send is not available, the Beamer settings have
been changed so that beaming is not allowed; see page 6-12.)
After you choose Send, files that contain data appear in a list.
Select the file you want to send:
- File 1 (274 bytes)
- File 2 (992 bytes)
File 6 (1433 bytes)
6. Select the file you want to send by doing one of the following:
• Using the arrow keys, scroll through the list of files to move the cursor
next to the one you want; then, press enter.
• Press the appropriate file # key along the top of the keyboard on the
device.
B
E A M E R

Beaming from One NEO to Another

6-3