Using Your Remote Control - Kohler K-1143 Homeowner's Manual

Using Your Remote Control

NOTE: Your remote control requires two AAA batteries. To install or replace them: Unthread the bottom
cap from the remote. Insert the batteries. Resecure the bottom cap to the remote.
NOTICE: You must synchronize the remote control before initial use.
Programming
NOTE: Perform the following at the user interface.
Press the [OK Icon] at the Main Menu on the user interface.
Scroll down to "System" at the Settings Menu, then press the [OK Icon].
Scroll down to "Remote" at the System Menu, then press the [OK Icon].
At the "Learn" field, press the [OK Icon].
As instructed on the Remote Menu, simultaneously press and hold the [Back Icon] and [Up Icon] on
the remote control for 3 seconds. The remote LED will blink while in programming mode. To exit
programming mode, press the remote Power button.
Operating
Once the remote control is synchronized, you may use it to navigate through the user interface
menus while bathing.
[On/Off Icon]: Powers the user interface "ON" or "OFF." (1)
[Select Icon]: Selects the action the cursor is on within a menu. (2)
[Back Icon]: Prompts the previous menu. (3)
[User Icon]: Prompts the User Menu to appear. (4)
[Up/Down Icon]: Scrolls the cursor up or down on the current menu. (5)
1078022-5-B
Programming
4
Operating
6
1
2
3
5
4
Kohler Co.