Alcatel-Lucent 9768 User Manual page 39

Installing an 9768 MRO B4
....................................................................................................................................................................................................................................
The power connector is equipped with a twist-off weather protection cap. The connector
also has a connector boot and bracket that must be installed over the power cord. The boot
and bracket prevent accidental disconnection of the power from the 9768 MRO while the
power cord is powered. Before connecting, ensure safe and appropriate disconnection of
power from the 9768 MRO.
Perform the following steps to connect the power connector to the 9768 MRO B4.
...................................................................................................................................................................................................
Remove the connector cap by twisting counterclockwise.
1
Figure 3-21 Power connector components
Power Power
Connector Connector
Cap Cap
...................................................................................................................................................................................................
Slide the power connector through the connector boot.
2
....................................................................................................................................................................................................................................
3-16
Boot Boot
Power Power
Cable Cable
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Procedure 3-1: Installing the 9768 MRO B4 onto a wall or
Bracket Bracket
pole
Alcatel-Lucent 9768 MRO
3MN-MRO-AWS-IMOP
Issue 1 February 2014