Belkin OMNIVIEW F1DZ102T Quick Installation Manual page 4

P74183ea_F1DZ102-104_QIG.qxd
This sheet will guide you through the basic steps needed to install the
OmniView SE Plus Series KVM Switch (the Switch). If you have any problems
during installation, please refer to the SE Plus Series User Manual.
The following items are needed to install the SE Plus:
• OmniView SE Plus Series KVM Switch
• One (each) PS/2 keyboard, monitor, and mouse
• One KVM cable per computer installed
• One 12V DC, 1A power supply unit
Recommended Cable Kits:
F3X1105-XX
F3X1835-XX-GLD
F3X1962-XX
F3X1895-XX-GLD
F1D108-CBL
(-XX denotes the length in feet)
16-04-2003 10:01
Introduction
PS/2 Style
PS/2 Style
USB Style
USB Style
Daisy-Chain Cable
Page 2