Signs Used In The Manual And On The Machine; Safety Measures Installed On The Machine - Tauler SmartMatic 2.0 Operating Manual

SIGNS USED IN THE MANUAL AND ON THE MACHINE

The safety signs used on the machine and in the manual of the same are as follows.
Electrical risk. Danger of suffering injuries or even death from
electrical discharge.
Risk of burns by contact with high temperature surface.
Risk of injuries to upper limbs by trapping in rollers.
Risk of injuries to upper limbs from trapping in moving Chaín.
Do not disassemble, cancel or bridge the safety measures installed on
the machine.

SAFETY MEASURES INSTALLED ON THE MACHINE

The installation has systems for isolating danger points, as described below. Said
systems are physical protection means that do not allow for the machine to operate
in the event that these systems are opened. There are also emergency stops for
each one of the modules.
There is also a system controlled by software, which avoids overheating of the
heating elements that provide heat to the calendar.
[Technical Documentation]