Table of Contents
Advertisement
[Technical Documentation]
Screen Settings
1-4
5
6
10-11
7
8
9
12
1-4. - LANGUAGE KEYS: By pressing this keys the user selects the language.
5. - Cutting roller speed: By pressing this key user tries between manual or
automatic cutting roller speed mode.
Automatic mode: The speed of cutting roller is chosen automatically by the
machine. If machine speed Until 10 m/min speed 1 is set, from 10 to 15 m/min
speed 2 is set and from 15 to 20 m/min speed 3 is set.
Manual mode: User can set speed 1, 2 or 3 independently of the speed of the
machine.
6. - Display of the speed of cutting roller speed 1, 2 or 3.
7. - Speed #1: in manual mode set the speed #1, medium speed.
8. - Speed #2: in manual mode set the speed #2, fast speed.
9. - Speed #3: in manual mode set the speed #1, extra fast speed.
Keys 10 and 11 are used for the fine-tuning of the micro-punched and cutting. For
further instructions on these keys see "FINE-TUNNING OF THE MICRO-PUNCHED
AND CUTTING".
12. - Right arrow key: For technicians only. It goes to special factory screen.
Hide quick links:
Advertisement
Table of Contents
