Table of Contents
Advertisement
[Technical Documentation]
Feeder Screen
2
3
4
5
9
1
6
7
8
11
1. - Left arrow key: Let the user to go to control screen.
2. - Run button. By pressing this button, the machine commences its operating
cycle automatically. If the guard is open, the machine will run while the button is
pressed. ONLY FOR CLEANING OPERATION.
3. - Stop button. By pressing this button, the work cycle of the machine is
stopped immediately. To reactivate the only thing that has to be done is to press
the previously mentioned Run button
4. - Manual Up: While this button is pressed, the input table will move up.
5. - Manual Down: While this button is pressed, the input table will move down.
6. - Output blowers: By pressing his button, the output fan battery is activated.
For adjusting the air flow, the potentiometric placed in the electrical cabinet must
be operated.
7. - Feeder on/off: By pressing this key, the feeder will be enabled or disabled.
8. - Pump on /off: By pressing this key the vacuum/blowing pump, will activated
or deactivated.
9. - Automatic rising of input table: Pressing this key the automatic movement
of pile will be activated or deactivated.
When the movement is activated, the input table will move up until the sensor
located on feeder detects the pile of paper.
10. - Thermo key: By pressing this key, the user will go to thermos screen.
Hide quick links:
Advertisement
Table of Contents
