Siemens SIMATIC RF600 System Manual page 45

Antenna configuration 4
Antenna configuration 5
SIMATIC RF600
System Manual, 05/2012, J31069-D0171-U001-A13-7618
RF600 system planning
4.3 Antenna configurations
Description/ application areas
Preferred for the identification of goods
at loading portals: Similar to
configuration 2, but with additional
reading reliability when the tag is at an
angle to the vertical.
①
Tag
This antenna configuration is possible
with the following readers:
RF670R with three antennas
•
Description/ application areas
Preferred for the identification of goods
at loading portals: The tag is located in
the field of radiation of all four antennas,
so the tag position can vary more than in
configuration 2 for reliable tag
identification.
①
Tag
This antenna configuration is possible
with the following readers:
RF670R with four antennas
•
43