Siemens SIMATIC RF600 System Manual page 44

RF600 system planning
4.3 Antenna configurations
Antenna configuration 2
Antenna configuration 3
42
Description/ application areas
This arrangement of antennas is
appropriate when the tags to be read are
only located on one side of the items to
be identified, e.g. when pallets are to be
identified on which the tags to be read
must be on a prespecified side.
①
Tag
This antenna configuration is possible
with the following readers:
RF670R with two antennas
•
RF630R with two antennas
•
Description/ application areas
Preferred for the identification of goods
at loading portals: The tag is located in
the field of radiation of two antennas; for
reliable tag reading, the height of the tag
above floor level must therefore be
known with reasonable accuracy.
①
Tag
This antenna configuration is possible
with the following readers:
RF670R with two antennas
•
RF630R with two antennas
•
System Manual, 05/2012, J31069-D0171-U001-A13-7618
SIMATIC RF600