Hardware Installation - Belkin OmniCube User Manual

P73050/F1D092AM/man.qxd
WARNING: Follow these directions closely and in the proper order. Failure
to do so may result in mouse and/or keyboard errors.
Before attempting to connecting anything to the OmniCube
computers, make sure everything is powered off. Plugging and unplugging
cables may cause irreversible damage to your computers and the OmniCube
Belkin Components will not be held responsible for damage caused.
1.
Find a convenient place to
put your OmniCube
small size makes it ideal for
the desktop. Take note of
the length of your cable kits
so that your computers,
OmniCube
mouse and monitor are
distanced properly.
2.
Connect the monitor to the
OmniCube
attached cable which
is included with your
monitor, connect it to the
HDDB15 female port on
the back of the OmniCube
labeled MONITOR.
4/28/00 1:43 PM

Hardware Installation

. Its
™
™ , keyboard,
™ . Using the
™
6
Page 6
™ or the
Back of OmniCube ™
™ .