Hardware Installation - Belkin F1U400 User Manual

INSTALLATION
14. Click on "Continue Installation" to install files.
15. Click on "Restart" to reboot your computer and proceed with installation.
16. Double-click on the Macintosh ® HD icon on your desktop.
17. Double-click on the file named "Belkin".
18. Double-click on the file named "Belkin USB Peripheral Switch".
19. Drag the icon named "F1U400" to your desktop.
20. Double-click on the icon named "F1U400".
You are now ready to use your Belkin 4X4 USB Peripheral Switch software.
Note: Automatic printing feature is not supported in Mac OS.
12
INSTALLATION

Hardware Installation

Step 1: Connecting Computers to the Switch
1. Connect the USB cable's A-type connector to an available USB port on your
USB computer.
DC
5V/2.5A
Repeat steps 1 and 2 for each additional USB computer you wish to connect.
2. Connect the USB cable's B-type
connector to an available port on
your Switch.
13