4.Preparation for configuring MODEM
Usually, MODEM has been configured by service provider and you can use it directly. But in
some instance, you need configure MODEM by yourself.
4.1 TCP/IP installation and configuration
Installation
If TCP/IP protocol is not installed, please install it first. Please refer to installation steps in WinXp
as follows(For classic start menu):.
1. Click <Start> and select [Settings] then click <Network Connections>.
2. Double-click <Local Area Connection> and click <Properties>.
3.
Click <Install...> and double-click <Protocol>.
4.
Select <Internet Protocol (TCP/IP)> and click <OK>.
Configuration (For classic start menu)
1. Click <Start> and select [Settings], then click <Network Connections>.
2. Double-click <Local Area Connection> and click <Properties>.
3.
Double-click <Internet Protocol(TCP/IP)> and select <Obtain an IP address
automatically>, <Obtian DNS server address automatically>.
16