Table of Contents
Advertisement
3.1 Application Structure
Network connection is shown as follows
WiMAX
Network
Phone
Legend:
Phone cable
Ethernet cable
3.2 Hardware installation
Make sure that your modem is powered off.
3.2.1 Connect to LAN
Plug one end of an Ethernet network cable into LAN ports on the back of the MODEM, and plug
the other end into an Ethernet port on a network device, for example: PCs or other network
devices. The Ethernet cable can be crossover or straight.
Note:
Don't insert phone cable into LAN ports.
3.2.2 Connect to phone
Connect phone cable to
3.2.3 Connect power adapter
Connect the included power adapter to the MODEM power port, and then plug the power adapter
into an electrical outlet. The Power LED on the front panel will light up when the adapter is
connected properly.
3.Connecting MODEM
Wireless
Fax
or
port of MODEM.
14
MODEM
Computer
Laptop
Advertisement
Table of Contents
