Additional Information - Sennheiser System 2015 Instructions For Use Manual

Hide thumbs Also See for System 2015:
Table of Contents

Advertisement

Available languages

Available languages

Additional information

The channel bank system
The 2015 System is available in five UHF frequency ranges with 1440
transmission/receiving frequencies per frequency range. Please note:
Frequency usage is different for each country. Your Sennheiser agent will
have all the necessary details on the available legal frequencies for your area.
Range A:
518 to 554 MHz
Range B:
626 to 662 MHz
Range C:
740 to 776 MHz
Transmitter and receiver have nine channel banks with up to 20 switchable
channels each.
channel bank 1... 8
channel bank U
Each of the channels in the channel banks "1" to "8" has been factory-preset
to a transmission/receiving frequency (see enclosed frequency table). These
frequencies cannot be changed but have been preset so that e.g. country-
specific regulations on frequency usage are taken into account. The channel
bank "U" (user bank) allows you to store your selection out of 1440
transmission/receiving frequencies that are freely selectable within the preset
frequency range.
An advantage of the factory-preset frequencies is that
the system is ready for immediate use after switch-on,
several systems can be operated simultaneously on the preset channels of
a channel bank without causing intermodulation interference.
Range D:
786 to 822 MHz
Range E:
830 to 866 MHz
channel 1
preset frequency
channel 2
preset frequency
preset frequency
channel 20
channel 1
freely selectable frequency
channel 2
freely selectable frequency
freely selectable frequency
channel 20
47

Advertisement

Table of Contents
loading

Table of Contents