Working With The Configuration Menu - Sennheiser System 2015 Instructions For Use Manual

Overview of menus
Display Receiver
SETUP Standard display in the configuration menu
INT.MIC Switching the internal microphone on/off
FADE Adjusting the gain reduction of the
automatic priority circuit
SQELCH Adjusting the squelch threshold
ACCESS Releasing channels for the user
TUNE Setting a frequency for a selected channel
in the channel bank "U" (user bank)
NAME Entering a name
RESET Loading the factory-preset default settings
¹
36

Working with the configuration menu

By way of example of the "FADE" menu, this section describes how to use the
configuration menu.
Getting into the configuration menu
Note:
In order to get into the configuration menu, the transmitter or receiver
must be switched off.
Press the SET button
Press the ON/OFF
¶
"SETUP" appears on the display, indicating that you are in the
configuration menu.
Transmitter
Standard display in the configuration menu
Releasing channels for the user
Setting a frequency for a selected channel
in the channel bank "U" (user bank)
Entering a name
Loading the factory-preset default settings
and keep it pressed.
¹
button and keep it pressed for approx. five seconds.
⎯
⎯
⎯