Indications And Displays On The Transmitter - Sennheiser System 2015 Instructions For Use Manual

Indications and displays on the transmitter

Battery status indication
The 4-step battery status display
provide information on the capacity of the BA 2015 accupack or the batteries:
3 segments:
2 segments:
1 segment:
Battery status display
and red LED flashing:
MUTE indication
The red LED lights up constantly when the microphone of the transmitter
is muted.
Audio peak indication
The yellow LED should only light up briefly during peak level passages.
When it lights up constantly, the line or microphone input level is too high.
Alphanumeric display
After switching on the transmitter, the alphanumeric display
the name of the transmitter. After approx. three seconds, the standard
display appears, indicating the channel bank (5) and the channel (01).
Display for line level
The display for line level (LINE)
display should show full deflection only during the loudest passages.
on the display panel and the red LED
capacity approx. 100 %
capacity approx. 70 %
capacity approx. 30 %
LOW BAT (you should immediately
replace the accupack or the
batteries)
shows the level of the line input. The
first displays
13