Panasonic SP28P Operating Instructions Manual page 42

IDENTITY PLATE AND CAUTION LABEL
Both an identity plate and a caution label for this product are attached to the
machine. Operate and maintain the machine according to the instructions on the
label.
∗1 : Nameplates on X-Y table are for maintaining machine's accuracy.
Do not move the unit by holding the Lodacell.
Holding the Lodacell may damage itself.
1E4C-448E
X-Y table
070LC0AA
Page 28
Recognition Unit
1E4C-457E
Conveyor Cover
STOP
Do not open the cover during operation.
STOP
Push the • • and check the machine stopped before this.
1E4C-455E
Do not move the unit by holding the camera.
Holding the camera may damage itself.
1E4C-AB00
∗1
ATTENTION
DON'T PUT YOUR HANDS
ON THIS COVER.
∗ Two plates are attached to the Y-axis cover.
1E4C-456E
1E4C-E-XXA00-A04-06