Instructions For The Installer - Smeg SE2320ID1 Instructions For Installation And Use Manual

Cooking hob
Table of Contents

Advertisement

For operation on 380-415 V 3N
cable (5 x 1.5 mm
For operation on 380-415V 2N
cable (4 x 1.5 mm
For operation on 220-240 V 3
cable (4 x 1.5 mm
For operation on 220-240V
30 cm hobs: use an H05V2V2-F type three-core cable, heat-resistant to
at least 90°C.
(cable 3 x 1.5 mm
60-70 cm hobs: use an H05V2V2-F type three-core cable, heat-
resistant to at least 90°C.
(cable 3 x 4 mm
90 cm hobs use an H05V2V2-F type three-core cable, heat-resistant to
at least 90°C.
(cable 3 x 6 mm
The earth wire (yellow-green) must be at least 20 mm longer than the
other wires at the end for connection to the appliance.
Depending on the hob you have purchased, the possible electrical connections are:
30 cm hobs: 220-240V
60-70 cm hobs: 220-240V
90 cm hobs: 220-240V
READ THE CONNECTION LAYOUT PLATE UNDERNEATH THE APPLIANCE OR AROUND THE
POWER CABLE WITH CARE.
The manufacturer declines all responsibility for damage to persons or things caused by non-
observance of the above prescriptions or by interference with any part of the appliance.
28

Instructions for the installer

: use an H05V2V2-F - type five-core
2
) heat-resistant to at least 90°C.
: use an H05V2V2-F - type four-core
2
) heat-resistant to at least 90°C.
: use an H05V2V2-F - type four-core
2
) heat-resistant to at least 90°C.
:
)
2
)
2
)
2
/ 220-240V 3
/ 220-240V 3
/ 380-415V 2N
/ 380-415V 2N
/ 380-415V 3N

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se2631id1Se2644idxSe2733id1

Table of Contents