Zte ZXV10 W300 User Manual page 23

WEP Key1 ~ WEP Key4: To input the encryption key. For a
128-bit key, input 26 hexadecimal digits or 13 ASCII
characters; for a 64-bit key, input 10 hexadecimal digits or 5
ASCII characters.
Click Submit to complete the configuration of WEP encryption.
F 1 5 S
I G U R E E T T I N G
Note:
popular adopted WLAN security protocol to enhance the
security and confidentiality of wireless communication.
Currently, allmost all of the existing WLAN network adapters
support WEP encryption.
To adopt the WPA encryption mode, select WPA-PSK, WPA2-
PSK, or WPA- WPA2 from the Authentication Type pull-down
list box. And the WPA encryption parameters are displayed, as
shown in Figure 16.
WPA Passphrase: To specify the WPA encryption key
(8~63 characters)
WPA Group Key Update Interval: To set the update
interval of the WPA encryption key
WPA Encryption Algorithm: To select the WPA encryption
algorithm, TKIP or AES.
Click Submit to complete the configuration of WPA encryption.
W L A N S
E C U R I T Y
WEP (Wired Equivalent Privacy) encryption is a
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 - Network Configuration
P – 2
A R A M E T E R S
17