ZXV10 W300 Wireless ADSL Router User Manual
If PPPoA is selected, the WAN connection configuration page is
shown as Figure 7. To create a PPPoA WAN connection, perform
the following operations.
i.
Specify the New Connection Name.
ii.
Specify the VPI/VCI value (provided by ISP).
iii. Input the Username and Password (provided by ISP).
iv. Leave the other parameters as default.
Click
v.
the Create button
F
8 C
I G U R E
R E A T I N G A
If Static selected, the WAN connection configuration page is
shown as Figure 9. To create a static WAN connection, perform the
following operations.
i.
Specify the New Connection Name.
ii.
Specify the VPI/VCI value (provided by ISP).
iii. Input the static IP Address, Subnet Mask, Default
Gateway and DNS server IP address.
iv. Leave the other parameters as default.
v. Click the Create button.
12
Confidential and Proprietary Information of ZTE CORPORATION
.
W A N C
O N N E C T I O N
– 4