Zte ZXV10 W300 User Manual page 14

ZXV10 W300 Wireless ADSL Router User Manual
1. In Windows taskbar, click Start > Control Panel.
2. Double-click the Network Connection icon.
3. Right-click Local Area Connection and choose Properties
from the pop-up short-cut menu.
4. Select Internet Protocol (TCP/IP), and then click the
Properties button.
5. In the Internet Protocol (TCP/IP) Properties dialog box,
check Obtain an IP address automatically and check Obtain
DNS server address automatically.
6.
Click OK to confirm and save the settings.
Method 2: Configure a static address for PC.
Perform the steps below:
1. In Windows taskbar, click Start > Control Panel.
2. Double-click the Network Connection icon.
3. Right-click Local Area Connection and choose Properties
from the pop-up short-cut menu.
4. Select Internet Protocol (TCP/IP), and then click the
Properties button.
5. In Internet Protocol (TCP/IP) Properties dialog box, check
Use the following IP address to specify this computer's IP
address. This IP address shall be in the same network segment
as the LAN port address of the W300 router and shall be in the
form 192.168.1.x (x is a decimal integer between
example, 192.168.1.2). Subnet mask is
Default gateway is set to 192.168.1.1.
6. Check Use the following DNS server addresses. To set the
IP address of the DNS
set it to 192.168.1.1.
7. Click OK to confirm and save the settings.
8 Confidential and Proprietary Information of ZTE CORPORATION
server, contact local service provider or
2~254, for
set to 255.255.255.0.