Zte ZXV10 W300 User Manual page 19

F 9 C
I G U R E R E A T I N G A
If DHCP selected, the WAN connection configuration page is
shown as Figure 10. To create a DHCP WAN connection, perform
the following operations.
i. Specify the New Connection Name.
ii. Specify the VPI/VCI value (provided by ISP).
iii. Leave the other parameters as default.
iv. Click the Create button.
F 1 0 C
I G U R E R E A T I N G A
W A N C
O N N E C T I O N
W A N C
O N N E C T I O N
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 - Network Configuration
– 5
– 6
13