Fitting The Adhesive Foam Rubber Strip; Fitting The Fixing Clips - Smeg PVA750BE Instruction Manual

Instructions for the Installer

2.2 Fitting the adhesive foam rubber strip

Fit the adhesive foam rubber strip
(supplied with the hob) around the
outside edge of its surround.
It will act as a cushion between
the surface of the surround and
that of the cabinet. The diagram
on the right shows the correct
position for the foam rubber strip.
Take great care when fitting it to
ensure that it does not project
beyond the outside edge of the
frame.

2.3 Fitting the fixing clips

Fit the fixing clips in all the points
marked with an arrow. The clips
fix the hob an ensure that it is
centred correctly.
To fit the clips to the hob, simply
press them gently horizontally into
the groove provided (fig. A).
Then turn them upwards to fix
them permanently in place (fig. B).
24